Results 1 to 5 of 5

Thread: WIRING HELP

  1. #1
    Senior Member
    Join Date
    Apr 2003
    Posts
    6,370

    WIRING HELP

    I want to wire 3x4' actinics on my ICECAP660.
    what do I do with the purple wires? or should I just run4

  2. #2
    Senior Member orion's Avatar
    Join Date
    Mar 2003
    Posts
    229

    Re: WIRING HELP

    hope this helps johnny rock:
    http://www.icecapinc.com/660-3.htm
    orion..

  3. #3
    Senior Member
    Join Date
    Apr 2003
    Posts
    6,370

    Re: WIRING HELP

    thanks ORION, I found that link earlier but still havn't figured out if I should tape up the purple wires seperatly
    or twist them together?

  4. #4
    Member
    Join Date
    Mar 2003
    Posts
    56

    Re: WIRING HELP

    All un-used wires are to be taped up seperately. Do not short them together
    Daniel
    M.A.S.K.
    Marine Aquarium Society of Kitchener
    www.maskcanada.org

  5. #5
    Senior Member
    Join Date
    Apr 2003
    Posts
    6,370

    Re: WIRING HELP

    thanks for all the help guys! its working awsome.now I'm just waiting for my IWASAKIS to arrive. anyone run 250w MH on a 90g before? I also have a 55g sump. Just curious about heat issues. ;D

Similar Threads

  1. wiring a MH Ballast
    By westmeath in forum Lighting, Filtration & Other Equipment
    Replies: 2
    Last Post: 03-28-2008, 12:24 PM
  2. wiring connectors
    By JeffD in forum DIY - Do it Yourself
    Replies: 9
    Last Post: 07-19-2007, 01:36 PM
  3. wiring the ballast
    By Bonaqua in forum DIY - Do it Yourself
    Replies: 4
    Last Post: 04-06-2006, 11:47 AM
  4. Ballast Wiring
    By Chrispol in forum Lighting, Filtration & Other Equipment
    Replies: 2
    Last Post: 12-05-2005, 08:57 PM
  5. Float Wiring
    By ShipWreck in forum DIY - Do it Yourself
    Replies: 4
    Last Post: 01-26-2005, 09:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •