Results 1 to 2 of 2
  1. #1
    Moderator Krugar's Avatar
    Join Date
    Jun 2004
    Posts
    3,174

    Stand Mods Need Help

    Okay first the clever drawings:



    and



    In order to fit my 20G sump under the stand, I had to remove the piece labelled B-4.

    I need to run a 2x2 or something similiar in order to re-attach the piece labelled I-2.

    Can anyone tell me if there's something else I need to do? Does it look like it'll be okay holding a 90G reef?

    Cheers!
    There is nothing so permanent as a temporary measure.

  2. #2
    Moderator Krugar's Avatar
    Join Date
    Jun 2004
    Posts
    3,174
    I should probably mention that B-4 connects only to E-2 and E-3 and rests on C-1 with dowels.

    E-2 & 3 are 1x2" made from pine. They're not a solid piced but rather several joined pieces.

    There's about 6" between B-3 and B-4.

    I *think* the load is supported along the edges. B-1, B-2, both Ns, and C-1 are way thick ply-wood. E-1 & the second E-3 run a rim around the top and the tank sits on the plywood and part of these 1x2"s.

    B-4 looks to me as if it's only purpose is to provide a spot to connect your shelves too in the right side compartment, but if I was sure about it, I wouldn't be here asking lol

    Cheers!
    There is nothing so permanent as a temporary measure.

Similar Threads

  1. MJ mods
    By redbelly in forum DIY - Do it Yourself
    Replies: 11
    Last Post: 01-31-2006, 09:40 PM
  2. Question for Mods
    By hippo! in forum Just Getting Started
    Replies: 4
    Last Post: 02-28-2005, 05:46 AM
  3. maxi jet mods
    By johnmorris in forum Just Getting Started
    Replies: 4
    Last Post: 02-12-2005, 02:19 PM
  4. New Mods
    By ijo in forum Aquaria Canada News
    Replies: 6
    Last Post: 11-25-2003, 06:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •